A 1 m long (366924) and
 

Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip
1000 Vrms-CAT II.

Used to connect an oscilloscope having a 1M-ohm input to a probe with a 50-ohm output. It is required when using the 701920 and 701922 probes with the DL1600 series.

Set contains one black and one red clip. 1000 Vrms-CAT II.

 

1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.

A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.



 

Active Probe

For playing voice memos.

Quality paper for the DL1600, DL1700E, DL7400 series.

 

701906 Long Test Clip

For recording and playing voice memos.

Three pockets are provided for storing accessories and the user’s manual.

BNC cable
BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

Quality paper for the DL750, DL9040/9140/9240 and DLM2000
 

The B9852MJ cable supplies power to the 700924, 700925 and 701921 differential probes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)

* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or 9VDC"at the probe input power connector. 
 

This attachment set can be used with PBA2500 and PBD2000.


 

Deluxe instrument cart with adjustable shelf positioning.





 

A subassembly of 1.2 m long test leads with alligator-clip adapters. Use only for circuits having voltage levels no greater than 42 V.

A 1 m long BNC-alligator clip cable. Use only for circuits having voltage levels no greater than 42 V.

All-purpose rolling instrument cart.



 

Powers instrument for approx. 2 hours. Charging time: approx. 4.5 hours.

 

A 1.5 m long connector-to-connector adapter cable complying with NDIS-MIL C26482. Used to connect a MIL-standard cable to the strain module

Three pockets are provided for storing accessories and the user’s manual.

Set contains one black and one red clip.1000 Vrms-CAT II.

D-sub cable (5 m) included. Supports Shunt-Cal.
 

For use with the Power Supply Analysis option (/G4).

 

Hard type carrying case.
 

For the DC power supply model (/DC). Allgator clip type.

 

An NDIS connector for direct connection to a strain module.

For the DC power supply model (/DC). Cigarette lighter plug type.

 

Ideal for storing accessories (probes, etc).

701948 Plug on Clip

For the Isolated Probe

Soft type carrying case.

Using a probe stand with a flexible arm and heavy base to hold and stabilize probes can simplify circuit board testing.

A transparent cover to protect the front panel.

This DC block can be used to remove the DC component from an incoming signal. Use this block if you want to remove bias voltage from reaching the PBL5000 probe.

A transparent cover to protect the front panel.

A transparent cover to protect the front panel.

NDIS cable (5 m) included

Bridge resistance:	120Ω (701955)
	350Ω (701956)

BNC-Banana-jack (female) adapter. Use for circuits having voltage levels no greater than 42 V.

Banana-plug (male)-BNC adapter. Use for circuits having voltage levels no greater than 42 V.

T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V.

Safety-terminal-binding-post adapter. Use for circuits having voltage levels no greater than 42 V.

Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.

For connection between DL1640 Series and 701680. Comes standard with the 701680 battery box.

A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.
 

For the DC power supply model (-DC).

Attached to the tips of logic probe (701980 or 701981) or mini-clips (B9852CR), the IC clips can be used to clip contiguous 0.5-mm pitch terminals. A total of 10 clips are included.

A clip set designed for the 700988, 700960 and 701940 probes.

701902: 1000 Vtms-CAT II (BNC-BNC), 1 m
701903: 1000 Vrms-CAT II (BNC-BNC), 2 m

Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.